Hidden Details

The temperature has been above zero recently! We barely have any snow right now, and I managed to get a little bit of annoying work done.

There are some parts of a house that are not talked about, like soffits. I never knew what soffits were or how a roof was ventilated before I started researching, and even after that I found very few examples of how people build the more hidden parts of a house. Some tiny houses don’t even have an overhang, and others simply don’t show what they did for theirs. Some houses have exposed rafter tails, but mine aren’t particularly pretty, and I definitely don’t want to leave any sheltered spots open for hornet nests.

At a building supply store, when I asked for something to use for solid soffits (my roof is not vented because I will be using spray foam), they suggested vinyl siding, which I could cut to size. I bought a few pieces of white siding and matching nails, plus some thin pieces of wood. Underneath the overhang on the sides of the house, the vinyl will be attached to the rafter tails, but under the front and back, there’s nothing to attach the vinyl to. So I planned to nail up those thin pieces of wood to give me something to nail to. The first piece I put up I was able to hammer the nails in straight, but that left no space for hammering the second piece. For the second piece I used nails at an angle, and was pretty proud of myself for getting both pieces up.

The pieces that are attached to the house are nailed in straight, while the pieces attached to the fascia are attached with angled nails. Cut to me trying to put up the vinyl. I’ll give you a list of how many problems I ran into:

  • First off, the vinyl strips I cut were slightly too wide for the front overhang, which led to some very time-consuming trimming and checking, trimming and checking.
  • If the nail bit into the wood slightly over from where I intended, the vinyl would bubble.
  • Trying to leverage nails out by pushing against the very flimsy attached piece.
  • Trying not to hurt my nicely stained fascia.
  • The fact that the nails were designed to be difficult to pull out.
  • The wood had some flex to it I think, which meant that the majority of the time I hit the nail, it wouldn’t move. Ah, how many times I’ve been up on a ladder and swearing.
  • Sometimes a nail would go halfway in, and then just would not go in any further.
  • I was hammering at an angle, against gravity, on a ladder, mere inches from the house and a window.
  • The pieces attached to the fascia started to push up while I tried to nail to them, sometimes ripping out of the nails attaching them. One piece almost completely detached, and I added a nail through the side fascia to keep it in place.
  • The final piece I was trying to attach had split, ripped out of its nails, and the end of it also split when I tried to attach it through the side. It was impossible to nail to because it would just push up further into the cavity. And there was no easy way for me to fix it or replace it with the vinyl already half-attached.

But they’re done:

20170121_150229

20170122_141851

If you look closely on the right, there’s a nail sticking out of the fascia that the vinyl is resting on. That’s all I could do. So don’t look close. 😛 It looks good from a distance!

I also cut the rest of the vinyl I need for the side overhangs. It was a lot easier and didn’t take as long because the side overhang is a bit smaller. Instead of having to cut where the vinyl curved, I was able to cut along straight lines:

20170122_162408

Putting the vinyl up along the sides should be way easier as well (except for the fact that they’re ten foot long strips) because I’m nailing into solid pieces of wood. But we had an ice storm today, so I didn’t get outside to work on the house.

Oh, my parents got me some wheel well covers for Christmas. 🙂

When all the snow melted off the roof, I took the opportunity to go up and inspect it, especially around the skylights and the ends of the ridge caps. It all looks good, and I checked the interior as well and it does not seem to be leaking! Yay! Phew!

I also measured all the windows so I can get ready to cut trim pieces. The plan is to cut them inside the tiny house, label them, then transfer them to the heated garage for priming and painting. I’m so excited to break out the purple paint! Then I’ll go from there.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

Quotes

"It takes as much energy to wish as it does to plan." - Eleanor Roosevelt

"It is not because things are difficult that we do not dare. It is because we do not dare that they are difficult." - Seneca

"Have nothing in your house that you do not know to be useful or believe to be beautiful." - William Morris
%d bloggers like this: